Liberty Street Economics

« | Main | »

May 11, 2015

Financial Innovation: The Origins of the Tri‑Party Repo Market

First in a two-part series

The conventional wisdom about financial innovation is that it is typically undertaken as a way to increase profits. However, financial innovation can also occur as a response to the need to reduce risk. Tri-party repo is an example of such innovation. While tri-party repo ultimately evolved in ways that created and amplified systemic risk (as we describe in the second post in this series), its origin was as a solution to inefficiencies and risks associated with the repo settlement arrangements prevailing at the time.

In the Beginning . . .

The tri-party repo arrangement was created in the late 1970s by Salomon Brothers, a securities dealer, in cooperation with its Treasury securities clearing bank, Manufacturers Hanover. The problem they were trying to solve was to eliminate the “double” financing costs that Salomon incurred whenever Treasury securities that had been pledged to a repo lender were returned to the dealer too late in the day to be re-delivered as collateral to a new repo lender.

To illustrate, suppose that Salomon borrowed $100 million against Treasury securities from Investor A in an overnight repo yesterday, but Investor A does not want to renew the repo today. To continue to finance these securities, Salomon would look for a new counterparty, Investor B, that would agree to lend it $100 million against the same collateral. To effect the change in counterparty, the securities would have to be delivered to Salomon via the Fedwire® Securities Service by Investor A against repayment of the repo, and then sent to Investor B in a separate movement of securities. If Investor A sends the securities back too late in the afternoon, it may not be possible to deliver them to Investor B before the securities wire closes for the day. In such a case, Salomon would incur a “double” charge: it would still have to pay interest to Investor B, but it would also need to finance the securities it held overnight through a “box loan” with its clearing bank, on which it was also charged an interest rate.

In the tri-party repo arrangement, Salomon—the dealer—and all its potential repo lenders had accounts on the books of the clearing bank, Manufacturers Hanover. Settlement would occur by Manufacturers Hanover transferring cash and securities between the accounts of Salomon and Salomon’s lenders on Manufacturers Hanover’s books. Under this arrangement, the dealer no longer depended on Fedwire to receive the securities from one lender and to send them to the other lender’s account. Indeed, settlement could occur at any time, even after the close of Fedwire Securities.

The Risks That Spurred Tri-Party Repo

Use of tri-party repo arrangements began to grow in the mid-1980s after a spate of defaults on repo contracts by dealer firms caused large creditor losses on “hold-in-custody” (HIC) repo arrangements. HIC repos arose in the 1970s as a way for repo borrowers to avoid the inconvenience of delivering repo collateral; instead of sending the collateral to the repo lender over Fedwire Securities, the dealer would offer to hold the collateral in custody on its books on behalf of the lender. However, the defaults of dealers like Lion Capital Group in 1984 and ESM Government Securities and Bevill, Bresler, and Schulman in 1985 caused large losses for some HIC repo lenders and made it clear that HIC repo arrangements did not adequately protect the collateral pledged to investors. The industry realized that it would be more secure and efficient for an independent third party to segregate and price collateral and to perfect a robust security interest in collateral by the lender through a segregated account in the lender’s name. The tri-party repo clearing banks were well positioned to play that role, and tri-party arrangements came to be viewed as a much more effective way to safeguard the collateral of repo lenders than HIC repo arrangements. The safety and cost-effectiveness of tri-party repo led to rapid growth in its usage by government securities dealers in the mid-1980s, amid the expansion of government securities issuance. By the late 1990s, as much as 75 percent of dealers’ financing of government securities may have been through tri-party repo (Garbade 2006).

In those early days, tri-party repo was limited to Treasury securities financing and was executed by the clearing banks through a very manual, cumbersome process that was subject to operational risk. In 1987, the Bank of New York invested in automating tri-party settlement to speed up the movement of cash and collateral. This process also included a lockup of cash and collateral to get as close as possible to simultaneous movements of collateral and cash for settlements, further enhancing the safety of the arrangement from the perspective of the repo lender. Security Pacific National Bank automated its tri-party repo settlement process shortly thereafter.

On April 14, 1994, the Fed began charging banks for daylight overdrafts on a minute-by-minute basis. Since delivering securities on Fedwire leads to an inflow of cash to the sender of the securities, it reduces the likelihood of the sender incurring an overdraft charge later in the day. (Mills and Nesmith have shown why this leads to earlier deliveries of securities in this paper.) These incentives led repo lenders to deliver the securities they had received in a bilateral repo early, generating big overdrafts for the clearing banks, which were charged back to the dealers. This development made tri-party repo even more attractive compared with bilateral repos; tri-party repos were generally open and rolled daily, and thus did not involve the cash transfers that generated overdrafts.

By reducing risk and costs associated with the settlement of bilateral repos, the tri-party arrangement made securities dealers more efficient and provided greater safety to their lenders. This innovation reduced the cost to dealers of making markets for Treasury securities, and enhanced Treasury secondary market liquidity. A liquid market for Treasury securities benefits the financial system and taxpayers in multiple ways, most notably by bolstering confidence in and demand for the asset class, thus reducing the government’s borrowing costs. In the second post in this series, we document how the efficiencies associated with the tri-party arrangement led to a huge increase in volume and allowed the financing of riskier securities, which contributed to systemic risk.

Disclaimer

The views expressed in this post are those of the authors and do not necessarily reflect the position of the Federal Reserve Bank of New York or the Federal Reserve System. Any errors or omissions are the responsibility of the authors.


  Martin_antoine
Antoine Martin is a vice president in the Federal Reserve Bank of New York’s Research and Statistics Group.

  Mclaughlin_susan
Susan McLaughlin is a senior vice president in the Bank’s Markets Group.

Comments

Feed You can follow this conversation by subscribing to the comment feed for this post.

While most of you post is accurate, I would point out one other factor that drove the creation of the tri party repo market. While the risk of not being able to turn around returned securities was a contributing factor, my memory of Salomon Brothers’ creation of the tri party product was that it was driven by one of our repo counterparts that complained about taking down numerous lines of collateral over the phone each day and then having to write out multiple tickets to input the trades. I believe the customer was SecPac Bank. They suggested to us that a better alternative would be for a third party to preform the trade input on their behalf and ensure that the collateral remain properly priced. The repo defaults of the mid 1980’s illustrated the value of tri party and from that point it became the market standard.

The comments to this entry are closed.

About the Blog

Liberty Street Economics features insight and analysis from New York Fed economists working at the intersection of research and policy. Launched in 2011, the blog takes its name from the Bank’s headquarters at 33 Liberty Street in Manhattan’s Financial District.

The editors are Michael Fleming, Andrew Haughwout, Thomas Klitgaard, and Asani Sarkar, all economists in the Bank’s Research Group.

Liberty Street Economics does not publish new posts during the blackout periods surrounding Federal Open Market Committee meetings.

The views expressed are those of the authors, and do not necessarily reflect the position of the New York Fed or the Federal Reserve System.

Economic Research Tracker

Image of NYFED Economic Research Tracker Icon Liberty Street Economics is available on the iPhone® and iPad® and can be customized by economic research topic or economist.

Economic Inequality

image of inequality icons for the Economic Inequality: A Research Series

This ongoing Liberty Street Economics series analyzes disparities in economic and policy outcomes by race, gender, age, region, income, and other factors.

Most Read this Year

Comment Guidelines

 

We encourage your comments and queries on our posts and will publish them (below the post) subject to the following guidelines:

Please be brief: Comments are limited to 1,500 characters.

Please be aware: Comments submitted shortly before or during the FOMC blackout may not be published until after the blackout.

Please be relevant: Comments are moderated and will not appear until they have been reviewed to ensure that they are substantive and clearly related to the topic of the post.

Please be respectful: We reserve the right not to post any comment, and will not post comments that are abusive, harassing, obscene, or commercial in nature. No notice will be given regarding whether a submission will or will
not be posted.‎

Comments with links: Please do not include any links in your comment, even if you feel the links will contribute to the discussion. Comments with links will not be posted.

Send Us Feedback

Disclosure Policy

The LSE editors ask authors submitting a post to the blog to confirm that they have no conflicts of interest as defined by the American Economic Association in its Disclosure Policy. If an author has sources of financial support or other interests that could be perceived as influencing the research presented in the post, we disclose that fact in a statement prepared by the author and appended to the author information at the end of the post. If the author has no such interests to disclose, no statement is provided. Note, however, that we do indicate in all cases if a data vendor or other party has a right to review a post.

Archives